Membrance Cleaning For Silt & Organic Foulants
In Sweden

• Suitable for use with polyamide thin film composite and cellulose acetate membranes
• Effective removal of organic matter
• High level of active substance
• Liquid product, easy to handle and simple to apply

 

Membrance Cleaning For Silt & Organic Foulants cleaning solutions are made up at 1.0% to 2.0% by volume with chlorine free product water and NaOH addition to give a pH of 10.5 to 11.5. It is recommended that warm cleaning solutions be use within the limits imposed by the membrane manufacturers. The duration of the cleaning cycle depends on the quantity and nature of the fouling. Although a cleaning period of 2 to 4 hours may be typical, and extended overnight soaking period may be necessary in the case of heavy fouling. Short periods of recirculation and soaking (15 minute change over) are considered good practice for heavily fouled membranes.

 

Membrance Cleaning For Silt & Organic Foulants is available in 30 kgs pails other packaging is available on request.

Note The recommendations are properties of the product are based upon what is believed to the most reliable information available and are not intended as recommendations, which infringe other patents. Although all products are subjects to rigid quality tests, no specific guarantee can be given because results depend not only on quality, but also on other factors beyond our control. We thus welcome consultation in the event of doubt about application, performance etc., but point out that oral recommendation, which vary, to the instructions contained herein and are not binding to us. This leaflet supersedes the previous one and a new issue may take place without notice to supersede this edition as and when it becomes necessary.